Hoist safety technology

1, The operation must be carefully checked before the rope is intact, limit switches, winch brake action is normal, the button is flexible, empty operating normally before use.

2, When you want to keep the rope hanging objects vertically, are not allowed to pull oblique hanging crooked.(lab  ball  mill )

3, Are not allowed to use overloaded, allowed hanging fixture, hanging allowed oxygen bottle and pressure vessels.

4, You must use a qualified rope and related spare parts, hanging objects to be fastened, hooks to hang steady, being forbidden to stand under hanging objects. When lifting sharp objects to prevent the rope was cut, and so should the mat board.

5, When lifting heavy objects, the first lifting of about 0.2 meters, before being lifted after the trial hanging correct. When lifting heavy objects moved, higher than 0.5 meters above the ground or equipment.(industry microwave)

6. When using electric hoist operator to focus the spirit, should avoid collisions with other objects hanging objects occur, note the presence of an electric wire rope hoist drum off slots or stacked, wire rope is slipping, the controller is sensitive or not, etc. , abnormal immediately stop lifting or cut off the power, and promptly notify the maintenance staff.

7, Are not allowed in the electric hoist press both directions on the control button operation.

8, After the non-stop operation will be hanging objects suspended in the air.

9, Can not use the stopper to brake.

10, Hoist after use should be parked in designated areas, and hooks rose two meters above ground level.

11, Is strictly prohibited with wet hands or metal objects touch electrical switches.

Stay tuned for detailed product information company official website: http://www.langfengmetallic.com/