(Live chat)
.jpg)
TD coating processing technology
2016-02-26
Changsha Langfeng Metallic coating can provide customers with the best solutions for most of the multilayer deposition coatings, such as TiC / TiN, TiCN / Al2O3, TiCN / Al2O3 / TiN composite coating, the product can enhance the life of 2 ~ 20 times or more.
TD coating treatment is a super-hardened surface treatment technology, it is a thermal diffusion carbide coating process (Thermal Diffision Carbide Coating Process) abbreviation, the English abbreviation "TD Coating".
1. Technical principles and characteristics
TD coating processing technology principle is put the prefabricated workpiece into borax molten salt mixture, metal carbide coating layer is formed by diffusion in the surface, which may be vanadium carbide coating at a temperature of 850 ~ 1050 ℃, niobium and chromium carbide may also be its composite carbide. Currently the most widely used is vanadium carbide coating, the main features are as follows:
(1) TD coating has high surface hardness, up to HV2800 ~ 3200, much higher than the nitriding surface treatment and hard chrome plating, and thus has a very high surface abrasion resistance, strain and corrosion-resistant properties .
(2) Due to the surface coating layer is formed by diffusion of metal atoms, thus the coating and the substrate having a metallurgical bonding, binding force is harder than the chrome plating and is much higher than PVD or PCVD coating, It is extremely important in applying to the forming Mold .
(3) TD coating thickness can up to 4 ~ 20mm, the coating is compact and smooth.
(4) It has high corrosion resistance.
(5)it can be achieve repeats processing .
2. The scope and application materials of TD coating process.
(1).The problem of sticking and strain between mold and the workpiece or the workpiece and the workpiece caused by the adhesive wear , such as various types of steel or non-ferrous metals drawing, bending, flanging, roll forming and die casting molds etc. or other surface contact with each other and there is relative motion, using TD coating process is currently one of the best ways to solve such problems, and it can improve its service life several times to several times.
(2) The problems of workpiece size differences caused by abrasive wear, adhesive wear, friction oxidation or interaction ultra , such as blanking, cold forging and powder metallurgy molds or other part. After the adoption of TD coating processing, it can improve the life of several times to several times.
Suitable materials for this technology as long as the material contains a certain amount of carbon, such as carbon content is greater than 0.3% of all types of steel materials, carbide, etc., all VC coating layer may be formed on the surface of the workpiece. However, according to the different use conditions, to get good use of effects and economy, the choice of materials is quite particular, advice and professional technical suppliers are needed to carry out in the future.
For more detailed product information, please pay attention to company's official website:http://www.langfengmetallic.com
